Heart-Lung Machine

The control system adopts advanced PLC control module, which better improves the safety, reliability and stability performance of the machine. The backup battery can switch to DC power supply uninterruptedly in case of mains power failure or power plug off, ensuring the machine to operate for about two hours under its prior parameters

Product Detail

Product Features:

The machine control system uses advanced PLC control, greatly enhancing the reliability and stability of the machine.
The machine is equipped with an emergency power supply that can seamlessly switch to DC power when the mains power supply is interrupted or there is a power failure, ensuring the device runs at original parameters for two hours.
The blood pump motor is a maintenance-free direct-drive motor, avoiding the possibility of belt loosening and breaking.
The blood pump tension adjustment method is steplessly adjustable with a self-locking function, making it convenient for perfusionists to use.
Single-head pumps can rotate within a 90° range to the left and right, while double-head pumps can rotate within a 120° range to the left and right, facilitating clinical use.
Each pump head of the double-head pump can operate independently or in linked operation under various ratio modes.
The machine can externally mount hanging pumps for clinical convenience.
The monitor is a touchscreen with four-channel temperature and four-channel pressure monitoring, featuring overpressure pre-warning and high-pressure alarm, and can control the main pump to decelerate or stop.
High-brightness, soft natural light LED illumination allows perfusionists to more clearly observe the blood level in the oxygenator.

Product Parameters:

1.Voltage: 220/230V，50/60Hz
2.Weight: 199kg
3.Dimensions: 1020×600×1400mm
4.Power: 750VA

Product Features:

Pump Head Drive Principle: The roller pump of the cardiopulmonary bypass system drives the blood in the perfusion tubing through the rotation of the roller pump rotor for laminar perfusion.
Main Unit Operation Panel: Uses a touchscreen interface, with an option for Chinese display.
Operating Voltage: 24VDC (can be externally connected to 220V AC 50Hz, including a UPS power supply).
Speed Range: 0-250 RPM.
Speed Error: ±1%.
Pump Head Inlet and Outlet Pressure Monitoring Range: -500mmHg to +800mmHg; error ±10mmHg;
- Overpressure alarm with deceleration or pump stop, overpressure setting range: -500mmHg to +500mmHg;
- Pressure can be set to control the deceleration or stop of the pump head;
- Facilitates monitoring of extracorporeal circulation perfusion conditions, preventing dangers during perfusion.
Temperature Monitoring Range: 0-50℃, with high and low overtemperature alerts.
Pump Head Sizes: 100mm (4 inches) and 150mm (6 inches);
- Pump head can rotate freely ±90°;
- Applicable tube diameters: 6, 8, 10, 12mm; 1/4, 3/8, 1/2 inch (6-inch pump); Applicable tube diameters: 3, 4, 5, 6, 8mm; 1/4, 3/8 inch (4-inch pump);
- Flow Rate: 0-11.3L/min (6-inch pump) or 0-4L/min (4-inch pump);
- Pump head can operate in both forward and reverse directions.

Prodct Features:

Operating Voltage: DC 24V
Flow Range: 0—11.3 LPM
Speed Range: 0—250 RPM
Speed Error: ≤0.5 RPM
Independent Components: The pump and the LCD touchscreen control panel are independent and can be hung separately on any columns, shortening the tubing and reducing priming volume.
Direct Drive Motor: The pump is driven by a direct shaft motor.
Rotatable Pump Head: The pump head can rotate freely within a 90° range to the left and right, reducing priming volume and preventing tubing kinks.

Previous : ECMO

Copy product links

Long by picture save/share

INQUIRY

在线询盘 MORE+

联系人 *
手机 *
描述
Submit

Security Code

Refresh the code

Cancel

Confirm

Inquiry Content：

You have no items to require

Add Successfully

Continue To Visit Inquiry Now

Heart-Lung Machine

分享至微信分享